Testing Service
Test on soil
- Atterberg Limit (Liquid Limit/Plastic Limit)
- Particle Size Distribution (Wet Sieve)
- Particle Size Distribution (Hydrometer)
- Vibration Hammer (MDD 4.5kg )
- Compaction Test (MDD 4.5kg )
- Sand Replacement (FDT)(field)
- CBR in-situ (field)
- CBR soaked (lab)
- Core Cutter (field)
- Mackintosh Probe (rental set)
- Mackintosh Probe test (field)
- Moisture Content
- Plate Bearing Test
- Dynamic Core penetration (DCP)
Test On Aggregate/Crusher Rock
- Sieve Analysis
- Particle Size Distribution
- Atterberg Limit (Liquid Limit/Plastic Limit)
- Moisture Content
- Relative Density & Water Absorption
- Aggregate Crushing Value
- Aggregate Impact value
- Sand Replacement (FDT) (field)
- CBR in situ (field)
- CBR soaked (lab)
- Rock Core Test and Compression Plus Trim
- Los Angeles
- Soundness Sulfat/ Magnesium
- Flakiness & Elongation Index
Test On Sand
- Atterberg Limit (Liquid Limit/Plastic Limit)
- Sieve Analysis
- Particle Size Distribution
- Moisture Content
- Vibrating Hammer (MDD 4.5kg )
- Aggregate Crushing Value
- Aggregate Impact value
- Sand Replacement (FDT) (field)
- Sand Replacement (FDT) (field)
- CBR soaked (lab)
Soil Investigation Work
- Deep Boring in Soil and Drilling in Rock
- Indentify Hard Layer
- Classification Test
- Undisturbed Sample Test
- Consolidated Isotropically Undrained Test (CIU)
- Undrained Triaxial Compression Test (UU)
- One Dimensional Consolidation Test (ID)
- Rock Core Test
- Unconfined Concrete Stress (UCS)
- Point Load
Test On Concrete/Mortar/Grouting/Brick
- 150mm × 150mm Cube Compression Test
- 100mm × 100mm Cube Compression Test
- 50mm × 50mm Cube Compression Test
- Cement Grout Test
- Rebound Hammer Test (NDT
- Concrete Core Test and Compression Plus Trim Test
- 100mm × 215mm Brick Strength Test
- Water Absorption Test
Test On Premix
- Pavement Thickness Test (Coring Method)
- Bulk Density Test
- Marshall Test
- Bitumen Content Test
- Tray Test/Spray Test
- Box Sampling Pavement Evaluation
- Dinamic Cone Penetration (DCP) Test
- Patching Hole with Coldmix Test
Test On Reinforcement
- Tensile Test
- Bending Test
- Rebending Test
Our Clients
![logo-jkr](https://globallab2u.com/wp-content/uploads/2021/09/logo-jkr.png)
![logo-felda](https://globallab2u.com/wp-content/uploads/2021/09/logo-felda.png)
![logo-jps](https://globallab2u.com/wp-content/uploads/2021/09/logo-jps.png)
![logo-eastman](https://globallab2u.com/wp-content/uploads/2021/09/logo-eastman.png)
![logo-tnb](https://globallab2u.com/wp-content/uploads/2021/09/logo-tnb.png)
![logo-ypmaintenance](https://globallab2u.com/wp-content/uploads/2021/09/logo-ypmaintenance.png)
![logo-paip](https://globallab2u.com/wp-content/uploads/2021/09/logo-paip.png)
![logo-ecer](https://globallab2u.com/wp-content/uploads/2021/09/logo-ecer.png)